基于循环子空间理论的线性系统测试矩阵优化

研究了线性定常系统在循环指数大于1(即其约当标准形不同的约当块有重根)的情况下测试矩阵的优化方法.以循环子空间相关定理的证明为基础,根据根向量链的相关特性,得到了测试向量的线性和与系统观测性的直接关系,给出了在保证系统可观测性的同时,使得测试代价最小的测试矩阵优化方法.算例表明,提出的方法简单直观,对配置测试向量具有良好的工程价值.     

基于博弈论的装备科研、购置、维修经费比例关系优化分析

通过不同时期国家战略部署、科研发展情况及经济承受能力对装备经费分配的影响分析,采用博弈的方法,建立了装备科研、购置和维修费之间的比例关系优化模型,给出了寻求纳什均衡点的迭代算法,并进行了仿真计算.仿真结果证明了该方法的可行性与正确性.     

一种无人战斗机系统使用保障费用分析方法

基于无人战斗机系统在使用保障上的特点,通过对有人战斗机使用保障费用模型进行合理改造,使其能适用于无人战斗机的使用保障费用分析。经过改造的模型具有结构清晰、概念明确的特点。适合在飞机总体设计阶段用于全寿命周期的费用估算以及飞机的费效分析和综合优化设计。通过与有人战斗机的使用保障费用进行对比计算表明,无人战斗机系统的使用保障费用具有明显的经济优势。     

基于事例推理的装备软件成本估算研究

采用基于事例推理的估算方法可以很好地解决传统经验函数估算软件成本时的局限性。讨论了装备软件成本估算和基于事例推理研究的特点，从总体上描述了基于事例推理装备软件成本估算系统结构和实现流程，阐述了主要的研究内容，包括影响软件成本因素、系统的事例表示方法以及相似度的基本算法及事例的改写，并通过实例验证了事例推理在装备软件成本估算实践中的具体应用。     

一种高速实时数据采集处理系统设计

针对目前高速数据采集中的实时性和同步性问题,提出了一种高速实时数据采集处理设计方案。根据上述方案进行了系统的硬件和软件设计,该系统以FPGA器件作为下位机控制核心,设计了时钟同步、数据采集、数据处理、数据缓存、数据通讯等功能模块;整个系统采用ARM微处理器作为上位机控制核心,基于嵌入式Linux 2.6内核进行软件编程,负责向FPGA发送设置参数和控制指令,同时对数据前端采样和处理数据进行存储、显示、统计等。经测试验证,该方案具有高速率、高精度、同步测量、实时处理、体积小、功耗低等优点。     

基于模糊动态层次分析法的军车全寿命费用模型

为研究军车最优的效费比，提出了控制军车装备费用增长的有效途径——全寿命费用管理方法，并通过模糊动态层次分析法建立了分析决策模型，将定性与定量的分析有机结合起来研究军车全寿命费用的变化趋势，有利于提高军车装备的可靠性和决策的科学性，具有较好的应用价值。     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

SP2100气相色谱仪数据采集卡设计

分析了“便携式火药分析试验综合信息平台”的关键组件——SP2100气相色谱仪数据采集卡的工作原理，对采集卡硬件、软件进行了设计。在采集卡软件设计中，重点对固件程序设计及驱动程序设计进行论述。试验证明：SP2100气相色谱仪数据采集卡提高了试验系统自动化程度和试验效率，缩短了试验周期。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

INS辅助的PMF-FFT快速捕获算法

为了快速地捕获卫星信号,研究了部分匹配滤波(Partial Matched Filter,PMF)算法及其参数选择依据。采用惯性导航系统(INS)辅助的PMF-FFT捕获算法,该算法首先利用惯性导航系统信息缩小信号捕获的2维搜索范围;同时,为改善PMF-FFT捕获算法的性能,在PMF过程中采用窗函数加权积分。结果表明,该捕获算法能够大幅减小平均捕获时间;且加窗后的PMF-FFT算法捕获性能更优。